מגבר כח POWERb MONO מבית KARAN ACOUSTICS

POWERb MONO - mono power amplifier Technical specifications 

The following data were consistently measured on random test objects and are typical of the product in question. Nominal operating mains (AC) voltage of all our products is 115V or 230V. If the mains supply voltage drops approximately 10% below its nominal value, the power output of our amplifiers will reduce itself by approximately 15%. 

INPUTS:
INPUT IMPEDANCE: INPUTSENSITIVITY: GAIN: 

XLR PIN LAYOUT: POWER OUTPUT: 

FREQUENCY RESPONSE: DISTORTION: 

TRANSIENT RESPONSE: SIGNAL TO NOISE RATIO: POWER SUPPLY: 

AC VOLTAGE:
AC VOLTAGE RANGE: 

WARRANTY: 

NETDIMENSIONS:
NET WEIGHT: PACKAGEDIMENSIONS: PACKAGE WEIGHT: 

1 balanced(XLR)and 1 unbalanced(RCA) 30 kOhm (balanced/unbalanced) 2.0V/RMS (formaxoutput)
+ 36dB 

PIN 1-ground, PIN 2-positive signal, PIN 3-negative signal 

(when use RCA input you need to insert XLR shorting plug!) 

1.200/2.100/3.600W at 8/4/2ohm (peak power output: 1.500W at 8ohm) 

20 Hz to 20 kHz, +/-0 dB; (DC to 300kHz, -3 dB) THD 0.03%
IMD 0.03%
Rise and Settling time < 450 ns 

Slew rate 1.500 V/us (Amplification stages) > 120 dB (unweighted) 

2pcs of 2.100VA low noise toroidal transformers, 180.000uF custom made capacitors bank 

115 V or 230 V (nominal line voltage) +/- 10% (from nominal line voltage) 

5 years, parts and labor 

504x292x603mm(whd); 19.8x11.5x23.7inch(whd) 105kg / 231lbs (each)
720x410x820mm(whd); 28.3x16.1x32.3inch(whd) 130kg / 286lbs (each)